pH Balance is a unique pH
balancer that maintains the ideal pH level between
7.2 and 7.8.
- Prevents pH drift
- Eliminates need to adjust pH
on ongoing basis
- Use each time water is
- One bottle treats up to 500
gallons of water
1. Adjust pH
and total alkalinity of freshly filled spa to proper
levels. (pH level: 7.2 - 7.8 ppm total alkalinity
level: 80-120 ppm)
2. Add entire bottle to filled
spa while the filter is running.
3. pH will
instantly increase or decrease to a reading between
the ideal range of 7.2 to 7.8.
Add to freshly filled water.
pH Balance should not be used in hard water
areas where calcium reading is above 150 ppm. In
these conditions, this formula will soften hard
water and release calcium into spa water possibly
causing cloudy water, scaling and clogging of spa
If you are not in a hard water area, but
experience clouding of spa water after applying
pH Balance, Leisure Time™ Spa recommends using
Bright & Clear to return clarity to water.
Chlorine, bromine, ozone and mineral purification