Granular product adjusts water pH and alkalinity down. Provides a greater amount of control for large and commercial spas.  

Features:

• Lowers pH and total alkalinity
• Increases effectiveness of sanitizer

Applications:
As Needed:
1. Make sure all equipment is OFF.
2. Add 1/4 oz. (1-1/2 tsp.) to the spa water.
3. Turn on circulation system for 30 minutes.
4. Retest water. If pH is still above 7.8, repeat steps 1-3.

Sizes:
2.5 lbs.

Tips:
For best results, dissolve granular products first by adding to a small, plastic pail filled with water. Then, apply the solution to the spa water.
It is important to maintain the pH between 7.2-7.8. High pH (above 7.8) can cause scaling and/or cloudy or colored water.

Compatible With:
Chlorine, bromine and biguanide sanitizers.